Store

Store

Filters

Bottom Cleaning Bit – Ø50.8 Depth 12.7
$0.00
Straight Double-Flute – Ø10 FL62 TL100
$0.00
Roughing Bit – Ø12 TL100 (3 Flute)
$0.00
Taper Ball Nose – Ø10 FL70 R4
$0.00
Taper Ball Nose – Ø6 FL31 R2
$0.00
Taper Ball Nose – Ø6 FL31 R~1
$0.00
V-Groove Bit – Ø6.35 45°
$0.00
V-Groove Bit – Ø6.35 60°
$0.00
Compression Bit – Ø12 FL32 TL75 (2 Flute)
$0.00
Compression Bit – Ø8 FL32 TL70 (2 Flute)
$0.00
Compression Bit – Ø6 FL28 TL75 (2 Flute)
$0.00
Double-Flute Down-Cut – Ø12 FL32 TL70
$0.00
Double-Flute Down-Cut – Ø6 FL32 TL60
$0.00
Double-Flute Up-Cut – Ø12 FL32 TL70
$0.00
Double-Flute Up-Cut – Ø6 FL32 TL60
$0.00
Down-Cut Bit – Ø12 FL32 TL70 (1 Flute)
$0.00
Down-Cut Bit – Ø6 FL32 TL60 (1 Flute)
$0.00
Up-Cut Bit – Ø12 FL32 TL70 (1 Flute)
$0.00
Up-Cut Bit – Ø6 FL32 TL70 (1 Flute)
$0.00
Compression Bit – 1/8" (3.175mm) DLC-Coated
$0.00
Solid Carbide Single Flute End Mill – 6mm x 42mm x 70mm
$0.00
Arden TCT Straight End Mill – 1/2" x 6mm x 24mm (3-Flute)
$0.00
Arden TCT Straight End Mill – 1/2" x 8mm x 26mm (3-Flute)
$0.00
Arden bits flat bottom 1/2' X 25mm X 15mm
$3,500.00

No results found

No results match your search. Try removing a few filters.